Termite treatment is a chemical procedure performed on soil, masonry, wood, and electrical systems to provide a building with a chemical barrier against underground termites before and after construction. A pre-heat treatment can also be done on a wooden foundation to prevent other species from entering your home.
A builder or exterminator will treat foundations, streams, and exits to prevent termite infestation. The construction contractor will inspect the site in preparation for termite pre-treatment. To protect the house from termites, careful pre-construction processing is required.
It is important that all new buildings receive proper termite pre-treatment and that all treatments are applied at the appropriate time during the construction process. When building a new building, there are a number of steps you can take to protect the new building from termites. To prevent termites when building a new home, it is wise to apply treatment before, during, and after building a home.
In homes of all ages, it’s important to constantly sanitize your belongings to protect yourself from termites. No one wants to know that there are termites in their new home, so it is vital to take all possible steps to prevent future infestations during the construction phase. Treating your home for termites during the construction phase is essential to protect your home from the dreadful infestation of these destructive pests. The most important step in any pre-construction phase is tillage before any construction starts, which can form a chemical barrier to keep termites from approaching a building.
Pre-treatment of newly built termites is done prior to pouring concrete for your home. For buildings under construction, the entire pre-construction termite control process requires frequent visits to the termite treatment company, which adds to the cost. Although four site visits are shown here, proper treatment can usually be completed in three visits with careful planning. You can use bait/monitoring systems for termite control prior to construction.
Since thermite is a soil pest, four main phases are introduced into the building soil. The most effective termite treatment is carried out on the building structure in the early stages of construction, and more precisely, when it starts right at the very beginning of construction. Depending on the phase of construction that a building goes through, termite treatments can be divided into pre-construction and post-construction treatments.
Termite control chemicals are used in an aqueous tillage solution to protect a building from termite attack. For wood processing, an oil or kerosene solution of these chemicals with a concentration of 1.0% is used. Use special anti-termite chemicals to treat the part of the building where wood products will be placed, such as cabinets, doors, and others.
The purpose of termite pretreatment is to create a barrier of termite-treated soil around a building so that food-eating termites die or return before they enter the building. Termite pre-treatment is a set of insecticide treatments that are applied by a professional pest control company at certain stages of the building process to help prevent termites. Professional termiticides and termite bait systems assist in the treatment process.
Termite primer systems are sometimes used to treat or protect existing buildings from termites, but primer systems are not recommended as a separate termite pretreatment for new buildings. Bait is an important option in a termite prevention and control program. In some cases, baits may be the only treatment modality; in other cases, supplemental fluid applications can be applied where termites are observed. While termites can infest buildings at any time, they are especially important when buying or selling a home, as termite inspections/infestation reports are often a condition of the sale.
Knowledge of building design is required to identify key areas where termites can enter. The correct and appropriate use of physical termite barriers during construction, as well as other building practices that help reduce the chance of termite infestation, is an important first step in long-term termite prevention. Before you start building, consider your termite prevention strategy so you know all the options available. This approach requires foresight in selecting and installing a quality physical termite barrier and landscaping solution that will make your home aesthetically pleasing rather than like a downstairs termite hunting buffet.
There are a number of steps that can be taken during renovations and new construction to reduce the chance of termite problems. However, if you decide to move to a new home, there are a few things you can do when building your home that will keep termites away for a long time, saving you a significant amount of money. In this post, we will discuss some options that homeowners can use to better understand how a property is treated for termites. The best time to provide termite protection is during the design and construction phase of the structure.
Pre-construction treatment of termites can help you guard against potential complaints in the future, as they often live in areas with high concentrations of moisture and humidity. Before carrying out any type of treatment, a thorough inspection of the building for the presence of termites should be carried out to determine the extent of their spread and the ways in which termites entered the building. Home builders can also request an exemption to allow the use of a thermite primer system as the second step of a building pretreatment if a borate treatment or horizontal treatment is used as the first step of a pretreatment program.
If you don’t want to pay an annual fee to replace Bait stations, Borate is your best bet. This solution is not applied to the soil, so you will also need a liquid treatment if you want to protect your foundation from termites.